Видео

Thanks for your help I watched till the end !

Die kann man kaufen bei gartenbahn-fb. Optisch tolle Signale die auch noch stabil sind, hab ich lange gesucht und hier gefunden. Dafür das es Maßanfertigungen in Handarbeit sind finde ich die Preise auch mehr als in Ordung!

Thank you very much!

I am glad you like it!

For the first couple of hours I made sure that they would stay away, but honestly I had more concernes about leafes and such falling on the wet resin and get stuck forever... luckly nothing of the above happened :)

Thank you, I am glad you enjoy my videos!

Hi mate, I appreciate your comment! Slowly but surely it comes together and looks like a railway station should look like, at least in my neck of the woods :) Greetings form Germany

As soon as I get the rest of my lanterns installed ther will be a "night reveal" so to speak. I also need to figure out my power supply for the lanterns since the circuit board I intended to use was overheating very quickly during a short test.

Thank you! As you might be able to tell I have a lowered platform edge on a small portion of my platform. This will be the place for a passenger walkway across the tracks which I have to build yet. For now there will be no overhead walkway...

Moin Jörg! Das ich noch keine Nachtaufnahmen gezeigt habe ist absicht, ich möchte zunächst noch meine Gleisfeldleuchten und die Wandlampen am Bahnhofsgebäude installieren um das Bild abzurunden. Aus technischer Sicht muss ich an der Stromversorgung arbeiten. Der Festspannungsregler den ich verwenden wollte überhitzt nach wenigen Sekunden Betrieb obwohl er laut Papier in der Lage sein sollte die Lampen zu versorgen. Jetzt bin ich dabei einen Trafo zu besorgen der mir die Lampen mit Strom versorgen wird.

@@summitrailway Moin Robert, das kann ich alles nachvollziehen, dann über ich mich in GEDULD. 🤓

Thank´s for all you comments, I appreciate every single one of them! Being able to remove the signals is mendetory for the upkeep of the layout in the long term. I am sure they will hold up for a long time but some day I will need to replace a LED or the whole Signal and at that point I will be able to. I am not an engineer but I try to find solutions for my problems anyways...

Thank you!

Thank you, I am glad you like the looks of it!

It is currently not planned to install a foot bridge. I will install a foot path across the tracks, therefore I have two short sections where I have lowered my platform edge to accomodate the foot path. A foot bridge might be a good option further down the road, I will keep your idea in mind!

Im schönen Frankenland :)

Thank you!

Glad you like it!

Your wish will most probably come true at the 22.nd of December. I have planned a get together with some friends to run the trains. At that time of the year it will be dark pretty soon so there will be night time shots as well.

Glad to hear that I am not alone :) Since I am taking my time for each step you might be able to catch up in the near future.

Yeah, they are the secret star of the show :)

You are welcome!

Thank you very much Eric, I am glad you like my last update!

@@summitrailway je voulais savoir où vous achetez les voies que vous utilisez et sont elles laiton ou nickelées ? Merci

@@44RICOUNET The tracks are purchased from THIEL-GLEIS, they are made out of brass. thiel-gleis.com/

@@summitrailway merci beaucoup

Je m excuse encore une question pour les rails flexibles : peut on les courber sans la machine à cintrer ? Merci

6,5m Nutzlänge, da kann schon ein ganz ordentlicher Zug platz finden. Auch wenn auf meiner Anlage eher kürzere Züge zuhause sein werden, ab und zu wird es schon mal einen langen Zug geben.

I totally understand that you want to see some trains running ... me to. I am working on a very dense time schedule regarding this project. I only got time for it on saturdays and sundays. During this time span I need to purchase supplies, build my garden railroad, video everything and last but not least make a nice video out of it so that you can see what is going on. The next planned train operation will be mid december this year. Bevore that date I will mostly focus on build progress. If all goes well one of the next videos will be at my friends layout, there will be some train operation for sure.

Thank´s a lot, I appreciate it!

Schön das dir meine videos nach wie vor gefallen! Auf zum nächsten Projekt :)

@@summitrailway Logo! Ich feier jedes einzelne. Und die Hühner sind der Oberhammer! In welchem Bundesland bist du eg?

I want the steel to rust since I like the looks of it. Once the whole edge is evenly covered in rust it will blend in with the rest pretty nicely. From a structural stadpoint I will have more than 10 years of livetime bevore the rust may get an issue.

Die Signale wurde auf meine Anwendung abgestimmt von FB-Modellbau angefertigt. Die Fertigungsqualität und Detail-Treue bei gleichzeitiger Robustheit haben mich überzeugt. Da ich gerade die ersten zwei Signale im Garten installiert habe kann ich noch keine Langzeiterfahrungen teilen.

Thank you very much. It is really nice to hear that you are enjoying my videos. I am already working on the next one :)

It is my pleasure!

Thank you, I appreciate it!

Thank you very much!

It is an ESU XL Sounddecoder, I have installed it myself and it was programmed by a friend of mine.

As soon as I get all the lights installed I will do exactely that! I can´t wait to see it myself but I want the full installation done first :)

I bought those of eBay. They work from about 12V up to 24V no problem and you can even switch plus and minus around however that works with led´s. I like them very much, they make a nice light and are fool proof. That´s what I need :)

They are called WAGO clamps. WAGO is the manufacturer but they are available from different manufacturers as well.

It is my pleasure, thank you!

Thank you!

Glad you like it!

Ich denke schon das man einen kleinen Schatten sehen wird. Da die Fenster milchig sind wird der aber nicht stören ... hoffe ich zumindest.

@@summitrailway ach so, ja das denke ich auch! Ein Schatten kann ja auch in echt sichtbar sein...

The wind protection is very much needed. My friend has lost almost all of his buildings during a storm in the past year. I don´t want to have the same problem so I am taking precautions. The buildings are bought all over the place. Most of the are from eBay, some I bought new and two of them are tailor made for me. Most buildings are kits which I have to assemble first. Since it is boring to watch a guy assembling plastic parts for several hours I do not show it in my videos.

Klasse, schön das es dir gefällt!

I am glad you like it! In school I only learnd very basic english, I haven´t had to much interest in a second language. Had you told me I would run a english youtube channel in 8 years I wouldn´t have belived you. I learnd most of my english from movies, series and interviews. My job in the aviation industry helps with it too. I think reckon is used mostly in Australia and New Zealand am I right? Anyways, now it is used in Germany as well 😂

Another idea that might work. Since I haven´t planned for the hooks in the ground this solution is done with at this building. But I can try it elsewhere.

I haven´t thought ahead so I had to use what was available at this point. A spoon would have helped for sure...

Thank you! Wind is one of the biggest problems for scale buildings in the garden. I have several different ways of ballasting them or fixing them to the ground but this idea was new to me as well. I thought it is worth a try.